Once the USB/IP server starts up, you can leave the Raspberry Pi be and switch to your PC. On Windows 11, you’ll have to undergo a long-drawn-out procedure to use the USB/IP client.

The Raspberry Pi Zero might still be hard to find, but at least it’s not hard to use. DIYer and teacher Te Co Ed shows off how to easily program and use the Pi Zero over USB. With Te Co Ed’s ...

[gbaman] based his work off the work done by [Dave-0] and others over at the Raspberry Pi forums. [LadyAda] also has a version of this hack, which we covered , that involves soldering a header to ...

The Raspberry Pi Zero is a pretty low key little device, but the folks over at Adafruit figured out that it’s possible to turn the Zero into a USB device, which means it can be used to make a ...

A comprehensive video covering how to set up your Raspberry Pi Zero so that you can access it via the USB port. Yes, plug it in to a USB port and you can use the command line or with a few tweaks ...

Booting from a USB drive also will only work if users are using Raspberry Pi OS version 2020-08-20 or later. There are also a couple of things users will need to ensure their Raspberry Pi boots ...

Benson Leung, an engineer at Google and one of the Internet's foremost USB-C implementation experts, has chimed in on the Pi 4's USB-C design too, with a Medium post titled "How to design a proper ...

Similarly one could hack in a resistor on the Raspberry Pi 4 after cutting a trace between both CC pins… or even simpler: never use an e-marked USB-C cable with the Raspberry Pi 4.

The Raspberry Pi 4 launched in late June and as usual, it’s a major upgrade over the prior model, packing more RAM, enough graphics horsepower to drive a pair of 4K displays, and USB-C charging ...

Unlock more potential in USB 3 by reading previous articles we have written. Expert R31 USB-C 3-in-1 SD card reader; PiGear Nano adds 8 x USB 3 ports to your Raspberry Pi ...