Last Fall [Kevin] wanted to program some newer TPI-only AVRs using an old USBasp he had kicking around his lab. Finding an “odd famine of information” and “forums filled with inco… ...

It’s assumed that you have procured one USBasp Programmer from your trusted component vendor! Connecting the programmer to your computer comprises of two steps. First step is the physical connection ...

USBasp.name=USBasp USBasp.protocol=usbasp; Finally, save and close the text file,then open the arduino IDE as usual,write your program in it and load the sketch (code) to your AVR microcontroller ...

It’s a USBasp programmer, but you can replace the firmware to use it for a different purpose. Report comment. Reply. jethomson says: August 26, 2011 at 12:02 pm ...

Protostack recommends using their USBASP AVR Programmer to program the converter. 13. Included in the kit are the following components: 1X DC Jack 2.1 x 5.5mm; 1X IC Socket 40 pin 15.24mm; ...